Publicidad
Idiomas disponibles
Idiomas disponibles
4. Once the iron reaches the selected temperature, it beeps and shows the selected
temperature number with corresponding fabric type and the iron symbol.
IRONING WITH STE M
Smart Steam ™ Technology
The Smart Steam ™ system automatically generates steam at
temperature settings between 5 and 7 (G).
G
Press the Steam On/Off button to turn on the steam function.
The Steam symbol on the digital display flashes, indicating that
steam function is ready (H).
H
Surge of Steam
Use to remove stubborn creases.
1. With the water tank filled to the M X mark, press appropriate fabric temperature selector
pushbutton to select the setting (between 5 and 7) for your fabric. Read garment's label
to help you determine fabric type.
Note: Steam is automatically turned off between settings 1 and 4.
2. Once you select the appropriate fabric setting, wait for iron to beep and display selected
setting.
3. Press the surge-of-steam button
steam (J). For best performance, leave an interval of 5 seconds
between bursts.
Important: lways stand the iron on its heel rest when powered
on but not in use.
Vertical Steam
Use for removing wrinkles from hanging clothes and drapes.
J
1. Make sure the water tank is filled to the M X mark and iron is
plugged into electrical outlet.
2. Hang the garment to be steamed on a clothes hanger. (Curtains
or drapes can be steamed once they are hung.)
3. Press appropriate fabric temperature selector pushbutton to
select appropriate setting (between 5 and 7) for your fabric.
4. Hold the iron close to, but not touching, the fabric.
5. Pull the fabric tight in your free hand and pump the surge-of-
steam button
K
Important: lways stand the iron on its heel rest when powered on but not in use.
7
to generate a burst of
as you move the iron over the fabric (K).
USING SPR Y
Use to dampen tough wrinkles at any setting (L).
1. Be sure the iron is filled with water.
2. On first use, pump the spray button
L
IRONING WITHOUT STE M
Note: You can use the Steam On/Off button to turn off the steam function in all settings
(1-7).
1. Select setting 1, 2, 3 or 4 to iron without steam (M). The Smart
Steam ™ system will automatically turn off and there will not
be any steam generated.
2. To dry iron at higher settings, empty the water from the
reservoir to prevent steaming.
3. Plug in the iron, wait until iron beeps and digital display shows
selected setting. If the steam symbol is flashing, press the Steam
On/Off button to turn off the steam function.
M
Tip: The steam symbol becomes steady, indicating the steam
function is off.
EMPYTING W TER T NK (OPTION L)
Note: It is not necessary to empty the water after each use.
1. Unplug the iron and let it cool.
2. To release the water, hold the iron over a sink with the tip
pointing down and to one side. Water will empty out of the
water-fill opening (N).
N
SPECI L FE TURES
Language Settings
Your iron has a multilingual digital display that lets you select from English, French and
Spanish.
To change the language (P):
1. Press and hold the (-) button for 2 seconds; the digital display
shows EN (for English).
2. Press the (-) button again, the display changes to FR
(for French).
3. Press the (-) button one more time and the digital display
changes to ES (Spanish).
P
Note: The languages will change in the order listed above.
4. To select the displayed language, press the (+) button or wait 3 seconds after the
language is displayed.
several times.
8
Publicidad
