Securing the TV to the Wall
To Prevent the TV from Falling
These are general instructions. The clamps, screws, and string are not supplied by Samsung. They must be
purchased separately. We suggest consulting an installation service or professional TV installer for specific
hardware and anti-fall hardware installation.
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been
firmly installed onto the wall.
- You may need additional material such as an anchor depending on the type of wall.
2. Remove the screws from the back center of the TV, put the
screws into the clamps, and then fasten the screws onto the TV
again.
- These screws may not be supplied with the TV. If they are
not, purchase screws with the following specifications:
• For a 48 - 65 inch model: M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a durable, heavy-duty string, and then tie the string
tightly.
NOTE
• Install the TV near to the wall so that it does not fall
backwards.
• Connect the string so that the clamps fixed on the wall are
at the same height to or lower than the clamps fixed on the
TV.
• Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have any
doubt about the security of your connections, contact a professional installer.
[UH8000-ZX]BN68-05868E-03L02.indb 29
Caution: Pulling, pushing, or climbing on the TV may cause the TV to
fall. In particular, ensure your children do not hang on or destabilize
the TV. Doing so may cause the TV to tip over, causing serious injuries
or death. Follow all safety precautions provided in the Safety Flyer
included with your TV. For added stability and safety, you can purchase
and install the anti-fall device as described below.
English - 29
2014-09-02
10:58:05