5. If you hold the button A.O.T. d pressed down for 2 seconds,
you can also, through repeated brief pressing of the
A.O.T. d button, select a specific weekday (e.g. only WED).
The selected setting is indicated in the display r.
6. To return to the selection of workdays, weekends or
whole weeks, once again hold the button A.O.T. d
pressed down for 2 seconds.
7. Press the button MODE SET/X-BASS j to save the set-
tings and return to automatic modus.
When the alarm signal sounds...
•
and the alarm function "Radio" has been selected, the ra-
dio plays for one hour at a pre-defined alarm volume. To
halt it, press the button VOL. —/ALARM SET 1 u or VOL.
+/ALARM SET 2 i.
•
and the alarm function "Signaltones" has been selected,
the signal tone sounds for 10 minutes, with an increasing
volume. To halt it, press the button VOL. —/ALARM SET 1 u
or VOL. +/ALARM SET 2 i.
Radio operation
For radio reception, completely unwind the wire aerial e
and, with the radio switched on, determine the most favour-
able positioning for it.
Switching the radio on and off
1. Press the button POWER t. In the display r the currently
selected frequency is shown.
2. Press the button POWER t once again to switch the ra-
dio off and return the appliance to the automatic modus.
Manual station selection
1. Press the button UP h to raise the frequency.
2. Press the button DOWN g to lower the frequency.
Automatic station search
You can have the kitchen radio search for stations.
The kitchen radio searches the frequency range until it finds
a station.
1. Press and hold the button UP h for two seconds: the
kitchen radio searches for the station with the next highest
frequency.
- 59 -