Computer Setup - Samson Meteorite Guia De Inicio Rapido

Computer Setup

Installing the Meteorite is a simple procedure that takes just a few
minutes. Simply connect the included USB cable and begin record-
ing. The following sections of this manual provide detailed instruc-
tions on setting up your Meteorite in Windows or MAC OS.
Windows
1. The first time you plug the Meteorite into a USB port, Windows
will install the universal USB drivers for that port.
2. To set the Meteorite as your default input/recording device, or to
change its settings, open the Control Panel, Hardware & Sound
settings, then click SOUND. Under Recording tab, you can se-
lect the Samson Meteorite from the list of devices and press the
Set Default button to set it as the default audio input device.
3. To set the gain of the microphone, click the Properties button,
and then select the Levels tab. Slide the control until the de-
sired level is reached. If you Find that the microphone red clip
LED is lighting frequently, turn this control down until the LED
no longer flashes red.
Apple MAC OSX
1. To start using the Samson Meteorite, simply plug it in. The LED
will illuminate to indicate it is receiving USB power. The MAC
will recognize the USB audio device and automatically install a
universal driver.
2. To select the Meteorite as the computer's audio input, open
System Preferences from the dock or the main Apple Menu.
3. Next, open the Sound preferences, choose the Input tab and
select Meteorite. To set the gain of the microphone, adjust the
Input volume slider at the bottom of the Sound dialog box. The
Input Level meter will show the recording level.
EN FR DE ES IT