JVC LT-22HG32U Manual De Instrucciones página 21

Other convenience functions
Selected Items
Setup
OSD Timer
5/10/15/20/25/30 Seconds/Never
SCART Input
Auto
RGB
CVBS
S-Video
SCART Output
TV / Monitor
PC Setup
Auto Adjust
H Position
V Position
Phase
Clock
HDMI Mode
Auto
PC
Video
Blue Screen
On / Off
Reset TV Setting
Software Upgrade
Version
Setup hint
The OSD is cleared automatically as per this setting.
But if you select "Never", the OSD is not cleared
automatically .(Press RETURN to clear.)
Factory setting, normally OK.
when RGB is input.
when Composite is input.
When S-Video is input.
This determines whether the SCART outputs the signal
from the internal tuner or whatever input is shown on the
screen.
H Position, V Position, Phase and Clock are adjusted
automatically as per the input PC video signal.
• When PC-input mode was selected and a PC-
signal was input, Auto Adjust will be performed
automatically.
To adjust the horizontal placing of the image.
To adjust the vertical placing of the image.
Eliminates the horizontal (PHASE) interfering lines.
Eliminates the vertical (CLOCK) interfering lines.
Auto (factory setting), can remain in this mode. Change
not necessary.
PC (for PC), if desired.
Video (for Video), if desired.
You can set the TV to automatically change to a blue
screen and mute the sound if the signal is weak or
absent.
• This option is not available for DTV, PC and Radio
mode.
Press to enter the Reset TV Setting screen.
Press to select "OK", then press ENTER. Reset the TV
function will now begin, and this unit will automatically
turn off.
This option is not available because of service purpose
only.
If you press , the μ-com's software version is displayed.
21