The Ins And The Outs - Samson Resolv sub88 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The Ins and The Outs
The sub88 features both balanced and unbal-
anced line level inputs and outputs so that con-
nection with passive or active satellites is easy.
It is recommended that you use the balanced
line inputs and outputs to interface the sub88
with active monitors like the Resolve 50a's. See
page 16 for a detailed cable wiring diagram.
1
UNBALANCED INPUTS
Unbalanced connections can be made using
the female RCA connectors.
Note: In order to get the lowest amount of
induced noise and hum, use the Balanced con-
nectors whenever possible.
2
BALANCED INPUTS
If you want to connect your mixer using bal-
anced line level signals, use the female XLR
connectors.
3
UNBALANCED OUTPUTS
These female RCA connectors send unbalanced
line level signals to powered satellite speakers
or an amplifier connected to passive satellites.
4
B ALANCED OUTPUTS
Male XLR connectors that send the balanced line
level signals to powered satellite speakers or an
amplifier connected to passive satellites.
5
SUB BYPASS JACK
The Sub Bypass jack provides a switch closure to
activate sub88's internal mute circuit. By using
a standard footswitch that you can buy at your
local music store or by making a cable with a
switch, or even by wiring a switch permanently
in the mix area, the sub88 can be easily turned
on and off.
6
AC INLET
Connect the supplied IEC power cable here. Be
sure that the power switch is in the off position
when connecting the AC cord.
Operating the Resolv sub88
1
2
3
4
6
11
11
5

Publicidad

Tabla de contenido
loading

Tabla de contenido