Tilt Protection; Before Using The Appliance The First Time; The Ideal Location - Unold 86525 Instrucciones De Uso

TILT PROTECTION

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials
and any transport safeguards.
Keep packaging materials away
from children.
2. Check whether all listed acces-
sory parts are present and intact.
3. Unscrew the adjustment nut on
the base foot and take it down.
4. Place the base on the axle. In this
regard, note that the feet on the
base must point downward (away
from the appliance).

THE IDEAL LOCATION

1. Maintain an adequate safety dis-
tance (at least 1 meter) to other
objects, such as furniture, cur-
tains, etc.
2. Only place the appliance in opera-
tion in a vertical position.
3. Ensure that air can flow in and out
unhindered - do not, under any cir-
When you lightly
shake the appliance
you will hear a noi-
se coming from the
interior of the appli-
ance. This is caused
by the tilt protection technology used;
there is no defect in the appliance!
The tilt protection switches the appli-
ance off immediately, as soon as the
appliance tilts to a position where safe
operation is in jeopardy.
5. Refit the adjustment nut and tigh-
ten it firmly.
6. Select the location for your appli-
ance, strictly comply with the ins-
tructions in the following chapter
in this regard.
7. When you use the appliance for
the first time, or if it has not been
operated for an extended period
of time, a slight odour can occur.
Body
cumstances, cover the air inlets of
the appliance.
4. Only place the appliance on a solid
and level substrate. Do not place
the appliance on soft surfaces
(sofa, bed) because the appliance
can tip over.
Adjustment nut
Base Adjustment nut
21