Sinmag Europe SMQ10 Manual De Instrucciones página 7

3. Operation
To start the machine, you must first make sure that the emergency
stop is not active. If so, turn the emergency stop to the right (reset).
Now you will be able to start the machine.
The machine can be operated by simply pressing the start button ON.
Now the cone will start turning and you can insert dough into the
input . The indication LED will burn when the machine is functio-
B
ning.
Before reaching the output, the dough will pass the flour dispenser.
This can be set to dispense more or less flour by means of the plates
at the bottom. After passing this, the dough reaches the output
4.Maintenance
The machine should be cleaned after each use. To clean this machi-
ne, you should use a moistened cloth.
Never use running water to clean the appliance!
SINMAG EUROPE BVBA
ENG
.
C
7