Changing The Label - Sony MDX-C800REC Manual De Instrucciones

2
Press either side of (DISC/PRST)
repeatedly until "Name Edit" appears.
3
Press (ENTER).
4
While "Track" is flashing, press (ENTER)
to select track name edit.
5
Press either side of (SEEK/AMS)
repeatedly to select the track you want
to label.
6
Press (ENTER).
The unit will repeat the track during the
labelling procedure.
7
Enter the characters.
1 Press the (+) side of (DISC/PRST) to
select desired character.
t A t B t C t ... x t y t z
... # T " T ! T ... 2 T 1 T 0 T
If you press the (–) side of (DISC/PRST)
repeatedly, the characters will appear in
reverse order.
Each time you press (DSPL/PTY), the
character type changes as follows:
A t a t 0 t A
If you want to put a blank space
between characters, select "
Selected track No.
."
2 Press the (+) side of (SEEK/AMS) after
locating a desired character.
If you press the (–) side of (SEEK/AMS),
you can move back to the left.
3 Repeat steps 1 and 2 to enter the
entire title.
8
Press (ENTER).
"Complete!" appears, and the selected title
is registered.
9
Press (MENU) twice.
To cancel the labelling procedure, press
(MENU) twice anywhere before step 8.
Labelling an MD
After step 3, press the (–) side of (SEEK/AMS)
to select disc name edit, and go to step 6.
The unit will repeat the disc during the
labelling procedure.

Changing the label

Overwrite the desired track/disc name as
described in "Labelling a track" and "Labelling
an MD."
27