Ibiza sound STANDUP-PRODJ Manual De Instrucciones página 6

Bafle activo tipo pupitre 2 x 12”/30cm 1000w
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
OPERATION
Normal Function
1. Be sure to switch off the power and to connect to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds till the speaker functions are connected.
3. Select an audio source by pressing the INPUT A key on the front panel to display FM,AUX A, USB A, BT-A. Press the INPUT B
key on the front panel to display AUX B, USB B, BT-B.
4. Adjust the SCRATCH/VOLUME/MULTI knob on the front panel or the VOL+/- key on the remote control to adjust the setting
of the main volume. Then turn the left push shot to adjust the volume of INPUT A, turn the right push shot to change the volume
of the INPUT B.
5. Press the LIGHT button on the remote control or press the LIGHT button on the front panel to display light mode, then press
the SCRATCH/VOLUME/MULTI knob to change the OFF, R,G, B,RG,RB,GB,RGB, AUTO,DEMO light mode.
6. Press the MUTE key on the panel or remote to mute, press it again to reset.
Press the X Drive on the panel or remote to turn on/off X-Bass effect.
Sound Effect
1. DJ EFFECT
Press SCRATCH, REVB, B.BOX, YEAH, BRING IT, PROC, GEYA on the front panel, or select SCRATCH, REVER B, BEAT BOX, YEAH on
the remote control, then turn the big knob to get the corresponding DJ effects.
2. MUSIC EFFECT
Press "CLUB, MARVEL, USER, LASER, YEAH" on the front panel, then turn the big knob to get the corresponding Music effects.
3. PARTY EFFECT
Press "PARTY EFFECT" on the front panel to select THRUST, ALARM, VECTOR, FIREWORK, RAINING.
Push the PARTY EFFECT rod. At the MAX position, you will get the corresponding PARTY EFFECT.
When you pull the rod back to OFF, the PARTY EFFECT will turn off.
Light color control
To control the light modes coming from the speaker panels by pressing the "MENU" button on the front panel or LIGHT on the
remote control.
• R = red lights flash
• G = green lights flash
• B = blue lights flash
• RG = red and green lights flash
• RB = red and blue lights flash
• GB = green and blue lights flash
• RGB = red, green, and blue lights flash
• Auto = the various color combinations cycle through and flash.
• Demo = lights flash and change color as if they were responding to the beat of the music.
Tuner applications
1. Before using the radio functions, you must attach the supplied antenna. Adjust the antenna to obtain optimum reception.
Press the INPUT A key on the top control panel or the FM key on the remote control, to select "FM" function.
2. Press the CH+/CH- key on the remote control to find radio bands that you have previously saved.
3. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency manually.
4. Press the AUTO key on the remote control, the machine will scan radio channels from low-frequency to high-frequency by
itself and memorize the channels one by one.
KARAOKE function
1. The machine can auto detect whether MIC 1 or MIC2 is inserted. Please turn off the microphone volume and adjust the
volume gradually after inserting the microphone.
2. Press VOL+/- on the remote or adjust the MIC.VOL knobs on the front panel to change the microphone VOLUME.
3. Adjust the ECHO knob on the front panel to change the microphone ECHO.
Note: Do not touch the top of the microphone when singing in order to avoid howling effect.
Adjust the microphone volume gradually to avoid howling effect.
©Copyright LOTRONIC 2017
6

Publicidad

Tabla de contenido
loading

Tabla de contenido