Removal/Replacement Of Drawer; Mounting The Utility Sink - Presenza QL040 Guía De Instalación Y Manual Operativo

Installation (continued)
DRAWER REMOVAL AND REPLACEMENT
To remove the drawer, pull it out to its fullest extension . On each
of the drawer slides there is a black lever . Push the lever on the
left slide up and the lever on the right slide down . The drawer
should now slide away from the cabinet .
Reverse this procedure to replace the drawer .

MOUNTING THE UTILITY SINK

1 . Carefully place a bead of sealant all around the
top of the cabinet (A) .
2 . Ease the sink (B) into the cabinet (A), ensuring
that it is placed evenly and is centered on
the cabinet . Wipe off any excess sealant . Use
masking tape to hold the sink in place until the
sealant dries .
9
Please contact customer.service@conglomkb.com or 1-877-333-0098 for further assistance .
Right drawer slide
Black lever
Left drawer slide
Black lever
B
CONGLOMKB .COM