Rubi VM-75 Manual De Instrucciones página 5

12.- Do not let other people, especially children, that are not related to
the work, touch the machine or cables and keep them away from the
work area.
13.- Store the machine when it is not being used in a dry, enclosed place,
out of reach of children.
14.- This machine will work better and safer at the ratings for which it
was designed.
15.- Use the machine correctly: Do not force a small machine to do the
work of a more powerful machine. Do not use this machine for
purposes it was not designed for.
16.- Do not wear baggy clothes and jewellery that could get caught in the
moving pieces. Non-slip footwear is recommended when working
outdoors. If you have long hair, use a hair net.
17.- Use protective goggles, and facial protection to avoid dust if the
operation produces it. Never pull the cable to unplug it. Keep the
cable away from heat, grease or sharp edges. Do not use the cable
for purposes it was not designed for.
18.- Stand firmly on the ground and keep your balance at all times.
19.- Be careful with what you are doing, use your common sense and do
Problem
The machine does not work
The machine stops
The machine does not vibrate
(MV)
The machine does not vibrate
(RV)
Table 1
Transformer
1st Speed
2nd Speed
Without the previous authorisation of GERMANS BOADA S.A., the partial or total reproduction of this manual, in any format or by any means or process, is strictly
prohibited, whether such reproduction be mechanical, photographic or electronic.
ENGLISH
Cause Solution
The power circuit is damaged Check that the plug is connected.
Check that the power socket is supplying electricity.
Check that the commuter is on.
The electrical circuit is
Check that the plug is connected.
damaged
Check that the power socket is supplying electricity.
Get a specialist operator to check and restart the machine.
The electric motor is broken Get a specialist operator to check and restart the machine.
The tension of the power
supply does not reach the Get a specialist operator to check and restart the machine.
nominal values
Machine Use
1 For small formats and as the first process of laying ceramics.
2 Final vibration after performing the first process at speed 1.
3 Final vibration in the case of large format ceramics
Final vibration in the case of hardened bases or special cases in which a high vibration
4
power is required.
not use the machine if you are feeling tired.
20.- The use of any accessory or complement other than the ones
recommended in this manual could cause the risk of personal
damage.
21.- This electric tool complies with the appropriate safety requisites.
Repairs should only be carried out by qualified personnel using
original spare parts, otherwise the user is risking considerable
damage.
F.- MAINTENANCE
1.- Before cleaning, maintaining or repairing the machine, and before
carriage, it should be disconnected and unplugged, an operation that
we recommend is done with a damp cloth.
2.- Do not use aggressive cleaning products when cleaning the machine.
3.- The machine should never be submerged in water.
-5-