Installation - Glacier bay 65828-1001 Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle
to relieve water pressure and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old faucet. Clean the mounting surface.
1a
NOTE: This step is for no escutcheon installation (optional).
□
Insert the faucet assembly (A) through the hole
in the sink.
A
18
1b
NOTE:
This step is for escutcheon installation (optional).
Silicone sealant is required under the gasket (E).
□
Place the bolts (F) into the escutcheon (D) and
ensure that the gasket (E) is pressed onto the
escutcheon (D) before the escutcheon (D) is
installed over the three holes in the sink.
□
Secure the escutcheon (D) to the sink using the
mounting nuts (G) provided. Hand tighten only.
□
Insert the faucet assembly (A) through the hole
in the escutcheon (D).
D
E
F
A
G
D