Installing The Keyboard In The Tray - Dell PowerEdge 1-U Guia De Instalacion

Installing the Keyboard in the Tray

1
Pull the tray out until it locks.
2
Loosen the captive Phillips screw that secures the tray's cable cover and pivot the cover
backward. See Figure 1-7.
Figure 1-7. Opening the Cable Cover
cable cover
NOTE:
When performing the following step, ensure that the keyboard/trackball cable remains
clear of the keyboard.
3
Tilt the front of the keyboard down, slide it under the palmrest and between the two
alignment features at the sides of the tray, and then rotate the back of the keyboard down
until it snaps into a locked position. See Figure 1-8.
cable-cover screw
Installation Guide
1-13