Hamilton Beach HHD610 Manual De Uso página 6

Operating Instructions
TO TEST ALCI PROTECTION DEVICE
This appliance is equipped with a polarized
Appliance Leakage Circuit Interrupter plug
(ALCI). This device will shut off hair dryer
automatically under certain abnormal
operating conditions, such as submersion
of dryer in water.
The ALCI must be tested before each use
of hair dryer.
1. Make sure ALCI is plugged in; then press Reset button on
ALCI.
2. Press Test button. Reset button should pop out, which
indicates ALCI is working properly.
NOTE: If Reset button does not pop out during test, or
pops out before or during operation, or if hair dryer fails
to function properly, do not operate hair dryer. Refer to
product warranty.
3. Press Reset button again to reactivate the ALCI. You are
now ready to operate the hair dryer.
TO DRY HAIR
1. Towel dry to remove excess water from hair.
2. Plug in hair dryer.
840251200 ENv05.indd 6
ALCI
Plug
6
10/17/14 3:04 PM