HumanTechnik iBell2 Instrucciones De Servicio página 19

Detector de hamadas para teléfonos móviles
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 52
Troubleshooting
Symptoms
The »iBell-2« does not blink
when a call/text message has
been received.
»iBell-2« blinks although no call
and/or text message has been
received.
The red LED under the reset
button is constantly blinking.
I have connected the »iBell-2«
with a wireless Humantechnik
alerting system, but it is not trig-
gering.
Possible causes/remedy
Check whether the batteries have been
inserted correctly and are fully charged.
Check whether the longest and strongest
vibration alarm has been set on your mo-
bile phone.
The device is very close to a strong wi-
reless signal.
Press the reset button and put the mobile
phone back in the housing.
The device was placed on an uneven or
vibrating surface (e.g. worktop with kit-
chen equipment).
The mobile phone was not placed in the
housing carefully.
Battery indicator:
Insert new batteries.
Ensure that the »iBell-2« is connected to
an „acoustic" transmitter. Ensure that all
the leads are connected properly. Adjust
the sensitivity to the highest setting.
EN
English 19

Publicidad

Tabla de contenido
loading

Tabla de contenido