HumanTechnik mona Manual De Uso página 26

ding image. When prompted „Delete?", confirm to deleting with „Yes"
or „No"
Video receiver: Reset to factory default
In order to reset the video receiver to the factory defaults:
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select „Default set.".
Press the left key
2. Use „" and „" to enable or disable the function.
3. Press „Save"
After resetting, the receiver will return to standby mode.
PLEASE NOTE: All custom settings and stored photographs will be lost!
Video receiver: AUX output
The charger base features an AUX outlet. It is hereby possible to
connect a vibrating pad or to establish a connection with the signal
systems lisa and signolux.
PLEASE NOTE: In order to use this function, the video receiver must be
placed in the charger base!
Vibrating pad (A-3303-0):
Plug the vibrating pad into the AUX outlet.
Connecting a Humantechnik signal system:
With the auxillary cable A-2974-0, a connection to the following trans-
mitters can be established:
- lisa RF babycry transmitter (A-2468-0)
- signolux Universal Acoustic Transmitter (A-2656-0, to be connected
over the doorbell input socket. Please set the receivers accordingly
to display the baby-signal)
AUX outlet
English 26
to cancel the process.
(Select) to enter the selection.
to save the setting.
to