Descargar Imprimir esta página

Helvex KFP-1 Guia De Instalacion página 4

Publicidad

Dimensiones Recomendadas para Mingitorios / Urinal Recommended Dimensions
Enrosque la manija en el sistema de accionamiento e instale el
9
pedal considerando la posición del fluxómetro previamente
instalado, marque los barrenos de los soportes y el pedal y
perfore.
/ Screw the handle into the actuation system and install
the pedal considering the position of the previously installed
flushometer, mark the holes of the brackets and the pedal and
drill.
Instale el tubo flexible con las abrazaderas colocando los taquetes y las pijas (Incluidas).
11
anchors and the dowels (Included).
NO sugerido
NOT suggested
Nota: NO hacer curvas
menores a 10 cm
/
Note: DO NOT make
curves less than 10 cm
Nota: NO doblar resorte
a menos de 90°
/
Note: DO NOT bend
spring less than 90 °
Inserte los taquetes incluidos y enrosque las pijas para asegurar
10
el pedal, finalmente coloque los botónes en el pedal.
included anchors and screw the dowels to secure the pedal,
finally place the buttons on the pedal.
taquete
anchor
/ Secure the spring with the clamps by attaching the
/ Insert the
botón
button
pija
dowel
pedal
pedal
NO sugerido
NOT suggested
Nota: NO hacer curvas
menores a 10 cm
/
Note: DO NOT make
curves less than 10 cm
Nota: NO doblar resorte
a menos de 90°
/
Note: DO NOT bend
spring less than 90 °
4

Publicidad

loading

Este manual también es adecuado para:

Kfp-2