Telephone Helpline: 0845 146 2887
Controls
Handle
Sealing Strip
Sealing Bar
Indicator Light
Timer Knob
Operation
1. Place the open end of the bag across the Sealing Bar
2. Press the Handle down firmly. Indicator light will turn red
3. When sealing is complete indicator light will turn off. Bag should now be sealed.
4. Remove bag and inspect bag and seal.
(Note: A good seal will look clear upon inspection. If the seal is spotty, incomplete, wrinkled, white
or milky, adjust timer knob and reseal.)
Cleaning, Care & Maintenance
Always allow to cool before cleaning
Disconnect from Power Supply
Use warm, soapy water and a damp cloth to clean the appliance.
Dry thoroughly after cleaning.
A BUFFALO dealer or qualified technician should carry out repairs if required.
WARNING: Do not allow any water to spill into the appliance when cleaning.
-3-
UK