Switching The Device On - Hama V2 Instrucciones De Uso

Navigation and controls
[NAVIGATE/ENTER/VOLUME] (7) has two different
functions:
• Turn [NAVIGATE/ENTER/VOLUME] (7) to select
among menu items.
• Con rm the selection by pressing [NAVIGATE/
ENTER/VOLUME] (7).
Press [Back/Info] (6) to return to the previous
menu level.
Volume adjustment
Turn [NAVIGATE/ENTER/VOLUME] (7) to increase/
reduce the volume.
6. Getting started
Note – Optimal reception
• For best reception, ensure that the antenna
is fully extended.
• Try various different positions if necessary to
get the best reception.

6.1 Switching the device on

• Connect the device to a properly installed
socket.
Warning
• Only connect the product to a socket that
has been approved for the device. The
electrical socket must always be easily
accessible.
• Disconnect the product from the mains
using the on/off switch – if this is not
available, unplug the product from the
socket.
• Wait until the radio initialisation procedure has
nished.
4
The station search in the operating mode DAB
starts up automatically when the radio is turned
on for the rst time.
By default, the radio starts with the English menu
navigation. Set up your desired language as
described in 6.2 Language.
6.2 Language
At initial startup, the language of the radio
defaults to English. To change the language,
please proceed as follows:
• Press and hold [Mode/Settings] (5) for about
3 seconds to access the settings menu.
• Turn [VOLUME/ENTER/NAVIGATE] to
navigate to the 'System' menu item.
• Con rm the selection by pressing [VOLUME/
ENTER/NAVIGATE].
• Turn [VOLUME/ENTER/NAVIGATE] to get
to the 'Language' menu item. Con rm the
selection by pressing [VOLUME/ENTER/
NAVIGATE].
• Turn [VOLUME/ENTER/NAVIGATE] to select
your desired system language.
• Con rm the selection by pressing [VOLUME/
ENTER/NAVIGATE].
Note
• You can choose from the following
languages:
English, German, Danish, Dutch, Finnish,
French, Italian, Norwegian, Polish,
Portuguese, Spanish, Swedish,Turkish.
7. Care and Maintenance
• Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive
cleaning agents.
• If you do not use the product for a long time,
turn off the device and disconnect it from the
power supply. Store it in a clean, dry place out
of direct sunlight.