Canon Ceiling-mount Hanger
RS-CL07/RS-CL10 Assembly/Installation Manual
Applicable projector models
(As of April 2008)
The Ceiling-mount Hanger is used to secure the projector to the ceiling.
Ask an expert builder to install the Ceiling-mount Hanger.
The Ceiling-mount Hanger RS-CL07/RS-CL10 can be used exclusively for Canon projectors
(models listed above). It cannot be used for any other equipment. Do not place/hang any other
Caution
objects on/from this Ceiling-mount Hanger. Do not let children hang from it.
Assemble and install this Ceiling-mount Hanger correctly in accordance with this manual.
Parts Lineup
Supplied Parts
Ceiling-mount bracket and Joint fi tting
Ceiling-mount bracket
* The Ceiling-mount bracket must
be separated from the Joint fitting,
before installation.
Ceiling-mount bracket
RS-CL07
Extension pipe RS-CL08/RS-CL09 (option)
Use an optional extension pipe (RS-CL08/RS-CL09) according to the ceiling height. For details, contact our
local agent.
RS-CL08
Outer/inner pipes and outer/inner covers
M5 screw (12 mm/0.5") : 4 pcs.
M3 screw (10 mm/0.4") : 1 pc.
The length is adjustable between 40 cm/1.3'
and 60 cm/2.0' in steps of 5 cm/2".
Projector weight
RS-CL07:SX7/SX6/SX60/X600/X700
RS-CL10:SX80
Weight: RS-CL07 (3.7 kg/8.2 lbs)/RS-CL10 (4.1 kg/9.1 lbs)
Joint fi tting
RS-CL10
RS-CL09
Outer/inner pipes and outer/inner covers
M5 screw (12 mm/0.5") : 4 pcs.
M3 screw (10 mm/0.4") : 1 pc.
The length is adjustable between 60 cm/2.0'
and 100 cm/3.3' in steps of 5 cm/2".
SX7/X700: 4.8kg/10.6 lbs SX6/X600: 4.7kg/10.3 lbs SX60: 4.6kg/10.1 lbs
SX80: 5.2 kg/11.4 lbs
RS-CL07
M5 screws (12 mm/0.5") : 4 pcs.
M4 screws (10 mm/0.4") : 6 pcs.
Anti-fall wires: 2 pcs.
Canon logo seal: 2 sht.
Template sheet for a ceiling-mount hole: 1 sht.
RS-CL10
M5 screws (12 mm/0.5") : 4 pcs.
M4 screws (10 mm/0.4") : 5 pcs.
Anti-fall wire (short) : 1 pc.
Anti-fall wire (long) : 1 pc.
Canon logo seal: 1sht.
Template sheet for ceiling mount hole: 1 sht.
Weight: RS-CL08 (2.2 kg/4.9 lbs)/RS-CL09 (3.4 kg/7.5 lbs)
1