Looking After Your Spirometer - CareFusion MicroLoop Manual De Funcionamiento

into which patient details can be entered and downloaded to the
MicroLoop or test results may be uploaded from the MicroLoop to
the PC.
Using SPCS and the MicroLoop, live blows can be performed with the
PC directly controlling the operation of the MicroLoop.
The results and graphs produced are displayed directly on the PC
screen.
The spirometer is connected from the serial or USB port on the PC,
to the USB port on the cradle using the USB cable provided with
SPCS.
NOTE: Keep the PC and Monitor out of reach of the patient at all
times.
It is recommended that whilst the unit is connected to a computer
the MicroLoop remains in the cradle.

Looking after your Spirometer

Please observe the following precautions:
 Do not touch the screen with fingers. Use only the stylus
provided.
 Use only a damp, lint free, cloth to clean the screen.
 Do not keep the spirometer in a damp place or expose it to
extremes of temperature.
 Do not direct the transducer holder towards a strong light
source whilst operating the spirometer.
 Check the AC charger for compatibility with local power rating.
32