Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LINK-BASE
Guide for installation, configuration and use
1
DESCRIPTION, CHARACTERISTICS AND CONTENT
Description
The LINK-BASE module, along with the optional cards
(RSD plug-in receiver + 1000 code plug-in memory,
LINK-GSM, LINK-BT) can be used to build a receiver
(radio, GSM or Bluetooth, respectively) to activate
control panels or other devices. The LINK-BASE module
d o e s n o t c a rr y o ut a n y f u nc ti o n w i t h o ut th e
aforementioned optional cards.
To build a rolling code radio receiver, it is necessary to
acquire the RSD plug-in receiver and the 1000 code
plug-in memory and insert them in the LINK-BASE. This
system can be connected to any control panel, since it
has two voltage-free relay outputs (RL1 and RL2).
The LINK-GSM kit and an SIM card is necessary to build a
GSM receiver to activate RL1 and RL2 by missed call or SMS
message (not supplied by Erreka).
To build a Bluetooth receiver which can be used to
activate RL1 and RL2 by smartphone (with Android 2.0
operating system or later), it is necessary to acquire the
LINK-BT kit, the installer application and the user
application for the smartphone.
LINK-BASE Module technical characteristics
• Power supply: 12/24VAC or 12/32VDC
• Two voltage-free relay outputs (RL1 and RL2)
(1A, 30VDC)
• Connector for GSM module (LINK-GSM)
Contents supplied
1 LINK-BASE Module
A LINK-BT Bluetooth card connector
(LINK-BT plug-in card, not included)
B RSD radio card connector (RSD-433 or RSD-868)
(RSD plug-in receiver, not included)
C Radio memory card connector (MEMO100)
(1000 code plug-in memory, not included)
D LINK-GSM Card connector
(LINK-GSM plug-in card, not included)
P1 Pushbutton 1
P2 Pushbutton 2
DL1 LED 1
DL2 LED 2
DL3 LED 3
The LINK-GSM and LINK-BT systems can be connected
to any control panel, since they are fitted with two
voltage-free relay outputs (RL1 and RL2).
The two relay outputs can also be used for other
purposes. In this case, follow all safety rules for the
envisaged use.
Taking this radio receiver as the base (LINK-BASE + RSD
plug-in receiver + 1000 code plug-in memory), the
LINK-GSM plug-in card can also be added in the LINK-
BASE in order to build the radio transmitter code
remote handling system (the LINK-WEB-RADIO kit must
be acquired).
To build a remote handling system for the VIVO-M203,
VIVO-M204 or VIVO-D203 control boards, it is
necessary to acquire the LINK-WEB kit.
• Connector for Bluetooth card (LINK-BT)
• Connector for RSD radio card (RSD-433 or RSD-868)
• Memory
card
connector
(MEMO1000)
A
B
C
DL2
DL1
DL3
12 - 24V
ST1
English
for
radio
D
P2
P1
Txd Rxd GND
+5V
ST2
C262A
codes
1
13
Publicidad
Tabla de contenido
