STEAM IRON
16
Water leaking from
sole plate
Too little steam
Not spraying
SPECIFICATIONS:
Functions: Dry/ Steam /Spray/ Burst / Vertical Steam / Self-Cleaning
CE:
Rated parameters:220-24ov~so/60Hz, 2000-2300W
Continous Steam Output :20-28 g/min
INFORMATION FOR USERS OF DOMESTIC APPLIANCES
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for
environmental safe recycling.
Set the thermostat diaI outside the
steam range.
The iron is not hot enough.
The water is over the max positi
on.
Check that the steam
selector is in the correct location.
Steam hole is blocked.
Too little water in the water
reservoir.
No enough thumb pressure.
Air trapped inside.
Set the thermostat diaI as per
steam range.
Open steam button only after
the indicator light
goes off.
Pour out the remaining water
Set the steam selector to the
proper location.
Clean hole with distilled water.
Fill water into the box
Press the spray nozzle with
your hand and push the spray
button several
times conti nuously.