Publicidad
Idiomas disponibles
Idiomas disponibles
This steam cleaner contains no user serviceable parts. Do not try to repair it yourself.
If steam cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped
into water, call Customer Service at 1-800-944-9200 for further instruction before continuing use.
CLEANING WAND AND WEDGE
PADS
„ Machine washable on "warm" setting. Always
use a mild detergent.
„ For best care results, lay flat to dry.
„ After the steam cleaner is used, press the Power Button to turn the power "OFF" and then unplug the
Power Cord from the wall outlet.
„ Press down the Steam Trigger to release all pressure.
„ Wait 7-10 minutes until the Safety Pressure Indicator has gone down, which indicates the
steam cleaner has cooled. After 10 minutes, if the Safety Pressure Indicator has not fully dropped,
release residual pressure by pressing Steam Trigger. Slowly start to unscrew the Water Fill Safety Cap
counter-clockwise while gently pushing on the Safety Pressure Indicator. DO NOT FULLY UNSCREW
THE WATER FILL SAFETY CAP AT THIS TIME. Allow machine to cool an additional 5 minutes. After
you have ensured the steam cleaner has cooled and pressure has been released, the Water Fill Safety
Cap should turn freely for removal. Unscrew the cap completely (3.5).
„ Empty the residual water in the tank and clean the external surface with a dry cloth. Allow to dry.
Re-install the Water Fill Safety Cap in a clockwise direction and tighten until completely sealed.
„ DO NOT OVERTIGHTEN SAFETY CAP.
„ Leaving unused solution in Solution Tank will not affect performance.
„ Store upright in a protected, dry area. Keep water Funnel* and Measuring Cup for future use.
*Select models
5. MAINTENANCE
6. STORAGE
10
IMPORTANT
Allow the steam cleaner to fully cool down before
performing any maintenance or troubleshooting
checks.
IMPORTANT
Never use bleach or fabric softener when
washing the Microfiber Cleaning Pad.
Publicidad
Capítulos
