Velleman CAMCOLVC13 Manual Del Usuario página 4

• 2 powerful LEDs: to illuminate in dark circumstances and as warning
signal
• user-friendly setup via push buttons
• comes with USB cable, bike bracket, window bracket and strap bracket
5. Overview
Refer to the illustrations on page 2 of this manual.
1 Camera Lens
2 LED Light
3 Microphone
4 Power button + LED Press
5 Live Record
6 Snapshot
7 LED Button
8 LED Flash
9 Open
10 Wrist Strap Hook
11 Mount Base
12 Battery
compartment
13 USB Port
14 Micro SD Slot
6. Use
Before use
• Open the housing. To do this, press the open button [9] and gently slide
the housing open towards the back.
• Insert batteries (refer to §8)
• Insert a micro SD card (not incl.) into the card slot [14]. Refer to the
indication next to the slot for the right direction. Only use a new card from
a reliable brand. Approximate recording times:
HD 1280x720 (30FPS)
Recording Time (Hours)
• Press the power button [4] shortly to set the camera in standby-mode. A
red LED under the power button lights up.
• Connect the USB-port [13] to a PC using the included cable. The LED
turns blue. The batteries are now being charged. Make sure batteries are
28.07.2010
CAMCOLVC13
Clean the lens by soft dry cloth before usage
2 Powerful LED to light/flash during low light
situations.
Advanced sensitivity microphone to record audio
to turn on/off the camera
Press to record live videos or stop recording.
Press to take single JPG photos
Press to turn on/ off LED light
Press to flash LED light or stop flashing LED
Push to open the casing
Attach wrist strap (included)
To support brackets and straps
Holds 2 rechargeable lithium batteries.
Plug in USB cable to upload data
Insert Micro SD card (up to 32 GB supported)
2GB 4GB
1
4
8GB
2 4
16GB 32GB
8 16
©Velleman nv