Care And Cleaning - Bebesounds NasalClear BR140 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Press the POWER
suction to clear the mucus.
NOTE: You may not think it is working because
the mucus may not immediately appear in the col-
lection cup. However, when you take it apart you
will see how well it is working.
5. Release the POWER button and remove from
nostril.
6. Repeat in other nostril and as needed.
7. Clean thoroughly as instructed below.
CURRENT aspirator manual.indd 8-9
CURRENT aspirator manual.indd 8-9
Figure 5
button and allow the
Figure 6
8

CARE AND CLEANING

1. Separate the suction portion of the aspirator
from the base by gently pulling them apart
(See Fig 7).
2. Unscrew collection cup by turning it to the left
(counterclockwise).
3. Remove white rubber ring located where
collection cup screws in.
4. Remove silicone tip.
5. Wash all 4 parts in warm soapy water or
in the dishwasher (top shelf only) after each use.
6. Dry all parts thoroughly before using again or
assembling.
7. Clean the base with a soft dry or slightly damp
cloth.
NOTE: The base of the aspirator should never be
submerged in water or any other liquid. Never put
it in the dishwasher.
9
Figure 7
4/18/06 12:17:06 PM
4/18/06 12:17:06 PM

Publicidad

Tabla de contenido
loading

Productos relacionados para Bebesounds NasalClear BR140

Tabla de contenido