GB
A
1-
HANDLE BLOCK MECHANISM
2-
HEIGHT ADJUSTING BUTTON
3-
CANOPY ROD
4-
SAFETY LOCK
5-
PRIMARY LOCK
6-
LOCK LEVER
7-
SEAT RECLINING MECHANISM
8-
BASKET
9-
BREAK
10-
REAR WHEELS
1
Before opening the pushchair the safety lock (4) needs to be unbuckled (1-A). Pull the
handles upwards while stepping on the footboard until it locks in place (1-B). Please make
sure that the handle bar is safely locked with an audible "click" (1-C)
2
Press both side bukles in order to unfasten the harness. Children should be harnessed in
at all times. Sit the baby in the stroller and then insert the buckles again, adjusting the
length of the strap. (Fig. 2)
3
To recline seat back, lift both handgrips to release seat locks and slide the seat back to
desired position. Lower handgrips to engage locks on both locks and sides.
To raise, push seat back to original upright or desired intermediate position (3).
Atention: Liftup the backrest while climb stairs or steep slope to prevent from falling risk.
4
To apply direct brake in all-four wheels, press central bar down. To release the brake, lift
it up. (Fig. 4)
INSTRUCTIONS
RECLINING THE BACKREST
PRODUCT KEY
11-
CANOPY
12-
SEAT BACK
13-
SAFETY HARNESS
14-
UPPER FOOTREST ADJUSTING
BUTTON
15-
LOWER FOOTREST
16-
SWIVEL DEVICE
17-
FRONT WHEEL
OPENING THE STROLLER
SAFETY HARNESS
BRAKE
4