Maintenance - Volpi V_BLACK E-PRO16 Manual De Uso

ADJUSTABLE NOZZLE 14 (FIG. "B")
Pressure Litres / Battery operating
(bar) min. time (hours)
5 0,74
3 1,20
Pressure adjustable through the nozzle
5.6. OPERATIONS TO BE CARRIED OUT AT TERMINATION OF WORK
When finishing work, pour the remaining liquid in a specific container and carefully rinse the internal of the tank and the hose
letting it flow through the lance with clean cold water.
Check that the water used for rinsing has completely come out.
Turn off the general on/off switch A (Fig. "A").
After having cleaned the tank, remove, clean and reassemble the filters (items 5 and 6, Fig. "B").
Unscrew the nozzle 14 (Fig. "B") from the lance 12 (Fig. "B"); disassemble the nozzle and clean the two parts with clean
water, paying attention not to damage or loose the OR.
Clean the handle using a damp cloth without soaking it in water. Unscrew the nut 10B (Fig. "C"); remove the hose from its
holder; remove the hose holder with filter 10F (Fig. "B") and wash it with clean water; then, reassemble all the parts.
Remove from the tank eventual materials or objects that could damage the sprayer.
Wear clothes and protective devices during these activities.
WARNING: Do not disperse the rinsing water neither the remaining solution in the environment; it is recommended
to pour all these liquids in specific drains, suitable for water purification and drainage.
Always switch off the general switch A (Fig. "A") after every use.
Keep the sprayer out of reach from children, protected from sunrays and cold temperatures and with completely charged
battery.
5.7. CHANGE OF LIQUID IN THE TANK
In case a change of the liquid inside the tank is necessary, follow the instructions given in point 5.6 and after that, the
instructions in point 5.2.
6.

MAINTENANCE

6.1. INTRODUCTION
A correct use of the sprayer and a regular maintenance are necessary to keep the sprayer in the best working, efficacy and
safety conditions.
Use exclusively original spare-parts.
6.2. BATTERY RECHARGE
The sprayer powered by a sealed storage battery, rechargeable with the supplied battery charger R (Fig. A).
A 5-Ampere fuse E, placed on the side of the machine base, protects the electric motor from eventual overloads and the battery
from eventual short-circuits.
To access the battery, remove the door F (Fig. "A").
In order to handle the battery in a safe way it is necessary to follow the below listed instructions:
•
Keep the battery away from high temperatures (ex. flames).
•
Do not open the battery.
WARNING: During the recharge operations, follow safe working procedures and carefully observe the general safety rules.
In order to recharge the battery, follow these instructions:
•
Turn off the general switch (Fig. "A")
•
Check that the network voltage corresponds to the indication printed on the battery charger plate R (Fig. "A").
•
Connect the battery charger R (Fig. "A") to a suitable and electrically protected current-socket.
•
Insert the battery-charge plug R (Fig. "A") in its specific socket D (Fig. "A") placed on the side of the sprayer base.
•
To recharge the battery completely, you need 8/9 hours.
____________________________________________________________________________________________________________________________________________________________________________________________________________
DAVIDE E LUIGI VOLPI S.p.A. - Via San Rocco,10 - 46040 CASALROMANO (MN) - ITALY
Davide e Luigi Volpi S.p.A.
Via San Rocco,10 – 46040 Casalromano (MN) – Italy
Tel. +39 0376.76009 - 76012 Fax. +39 0376.76408
www.volpioriginale.it
E-mail: commerciale@volpioriginale.it
Litres for each
battery charge
6,0 260
7,0 500
– export@volpioriginale.it
FAN NOZZLE 15 (FIG. "B")
Pressure Litres / Battery operating
(bar) min. time (hours)
3 1,22
1 0,82
Pressure adjustable through electronic regulator
YLB20VBE_0 Libretto d'uso V_BLACK E-PRO 16
Litres for each
battery charge
7,0 500
9,0 440
pag. 16 di 40