Ezviz CS-W3-WD1200G Manual De Instrucciones página 11

Wiring
1. Connect the WAN port to the Internet via network cable.
IPC
ACCESS
2. Connect your router to power outlet via power adaptor and wait for 90 seconds.
ACCESS
Configuring
You can configure the parameters through the computer or the mobile phone. We take the computer configuration as an
example.
3. Connet the LAN port and the computer via network cable. The computer will get the IP address of
the router automatically.
4. Open the Internet broswer (Internet Explorer 8.0 and above is recommeded) and input 192.168.7.1 or
wifi.ezvizlife.com. Press Enter to go to the configuring page.
5. Set the parameters such as router password, Wi-Fi name and password, etc.
You can also connect your mobile phone to Wi-Fi from the router, open the broswer in the mobile phone, and folloccw
Step 4 and Step 5.
IPC
Power Adaptor
IPC
ACCESS
ADSL Modem/Optical Modem/Optical
Network Unit/Cable Modem
Network Port
OR
Power Outlet
3