Hama 46319 Instrucciones De Servicio página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
00046319bda
31.01.2003
10:20 Uhr
L Introduction
L
The 3.6V and 7,2V Li-ion Camcorder Battery Charger can charge
almost all SONY, PANASONIC, JVC/VICTOR, CANON, SHARP etc
Lithium-ion Camcorder Batteries.
The Charge mode is automatic process form constant current mode
into constant voltage mode to keep the battery fully charged at the
end of the charging function.
The LED indicator light up if battery is inserted properly. There are 4
LED at the top of the cabinet to check the battery capacity at
charge mode.
The camcorder battery charger can be powered by a standard AC
outlet or on the road form the cigarette lighter socket in your
automobile. Avoid prolonged charging with cigarette lighter socket
in your automobile when the car engine is not running; this may
cause the battery of your car to drain. Note also that in some cars
the cigarette lighter plug is not provided with electricity if the
ignition is not switched on.
Operation
1. Insert the connecting cable into the socket at the rear of the
charger, it permits the Li-ion battery to be charged from the
cigarette lighter socket of the car ofr form a main AC outlet in
your house.
AC Socket
Charger
Seite 8
AC/DC Adaptor
6
2. For 7.2 V Li-ion batteries, insert your battery directly into the
unit for charging (see Fig.a). If the battery type like Sony NP-
F200 battery is applied, then when release the battery, push
the pusher knob back and pick up the battery. (see Fig.b).
Fig.a
3a. For 3.6 V Li-ion batteries, select the battery adaptor plate
properly according to the type of battery you would like to
charge. (see Fig.c & d)
Fig.c-3.6 V Li-ion Battery Type
(JVC/VICTOR)
3b. Then insert the adaptor plate with battery in the unit for
charging. (see Fig. e)
Fig.e-3.6 V Li-ion Battery Type
4. The charge process is automatically. The red LED light up
showing the capacity of your battery during the charging.
When the battery is charged completely, all 4 LED will light up.
At this stage, the charge will maintain the battery capacity full.
7
Fig.b
Fig.d-3.6 V Li-Ion Battery Type
(SHARP)

Publicidad

Tabla de contenido
loading

Tabla de contenido