JVC DT-R24L41D Manual De Instrucciones página 29

Computer signals (preset)
DVI-D (HDCP) terminals
No. Signal name
1 VGA60
2 WVGA60
3 SVGA60
4 XGA60
5 WXGA (1280)
6 WXGA+60*
4
7 SXGA60*
4
8 WSXGA+60*
4
9 UXGA60*
4
10 WUXGA60*
4
11 720/60p
12 1080/60p*
4
13 720/50p
14 1080/50p*
4
For DT-R17L4D: When No. 6-10, 12 or 14 signals come in, thin lines will become obscured because their signal resolution is higher than the
*4
screen resolution.
• Non-preset signals may not be displayed normally even if their frequency is within the acceptable range (☞ "Horizontal/vertical frequency
(computer signal)" on page 24).
• When a preset signal comes in, the signal format is shown on the status display. For other signals, the resolution is shown.
Specification of the DVI-D (HDCP) terminal
Connect it to the DVI-D output terminal on a personal computer.
Pin
No.
1 T.M.D.S Data 2–
2 T.M.D.S Data 2+
3 T.M.D.S Data 2 shield
4 NC
5 NC
6 DDC Clock
7 DDC Data
8 NC
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different
from actual products.
• Design and specifi cations are subject to change without notice.
• All company names and product names mentioned herein are used for identifi cation purposes only, and may be the trademarks or
registered trademarks of their respective companies.
Resolution
Horizontal Vertical
640 480
852 480
800 600
1024 768
1280 768
1440 900
1280 1024
1680 1050
1600 1200
1920 1200
1280 720
1920 1080
1280 720
1920 1080
Pin
Input signal
No.
9
10
11
12
13
14
15
16
Frequency
Horizontal (kHz) Vertical (Hz)
31.5
31.5
37.9
48.4
47.8
55.9
64.0
65.2
75.0
74.0
45.0
67.5
37.5
56.25
Input signal
T.M.D.S Data 1–
T.M.D.S Data 1+
T.M.D.S Data 1 shield
NC
NC
+5 V Power
GND
Hot Plug Detect
Scan system
59.9 Non-interlace
59.9 Non-interlace
60.3 Non-interlace
60.0 Non-interlace
60.0 Non-interlace
60.0 Non-interlace
60.0 Non-interlace
60.0 Non-interlace
60.0 Non-interlace
60.0 Non-interlace
60.0 Non-interlace
60.0 Non-interlace
50.0 Non-interlace
50.0 Non-interlace
Pin
Input signal
No.
17 T.M.D.S Data 0–
18 T.M.D.S Data 0+
19 T.M.D.S Data 0 shield
20 NC
21 NC
22 T.M.D.S Clock shield
23 T.M.D.S Clock+
24 T.M.D.S Clock–
EN
27