Product Overview - HEIDENHAIN IK 5000 QUADRA-CHEK Manual De Instrucciones

Accessories
The following items are optionally available and can be
ordered from HEIDENHAIN as accessories:
Accessories
Foot switch
Joystick
Fiber-optic cable
Fiber-optic cable connector
Holder
Amplifier
Calibration standard
2-D demo part
3-D demo part
3-D demo part for multi-sensor
scanning
Adapter cable for encoder
connection
Adapter cable for Stepper
Amplifier connection
Adapter cable for Stepper
Amplifier to Joystick connection
Adapter cable for Stepper
Amplifier to PC connection
HEIDENHAIN | IK 5000 QUADRA-CHEK | 7/2016
4
ID number
681041-02
681044-xx
681049-xx
681049-xx
681050-xx
681045-xx
681047-01
681047-02
681048-01
681048-02
540540-xx
540541-xx
540550-xx
540660-66
540660-53
Personnel requirement
540660-05
4.1
Front IK 5000 card
Further Information:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Installation
NOTICE
Risk of damage to internal components!
Do not engage or disengage any connecting
elements while the unit is under power
Depending on the unit's equipment, the
installation may differ from the procedure
described in this chapter. If the Addendum
shipped with the product contains information
on the installation, the information given in
the Addendum takes precedence over the
information in this chapter.
The responsibility for every system in which
this product is used lies with the person
installing this system.
The illustrations of pin layouts always show
the pin assignments of the connector on the
unit and not of the connecting cables.
The following steps are only to be performed
by qualified personnel!
Further Information:
page 16.

Product overview

"A", page 4.
X, Y, Z axes and foot switch connection
X, Y, Z axes CNC connection
Output voltage jumper
Probe trip point jumper
Interpolation DIP switches
Reference input for optical waveguide from the light
source
Input for optical waveguide from the projection
screen
SATA power connection to PC power
50-pin connection to flyout
40-pin connection to flyout
20-pin connection to flyout
30-pin connection to flyout
16-pin connection to flyout
10-pin connection to flyout
"Personnel qualification",
19