Estructura De Menús De Dfon - Baumer CombiLyz AFI4 Instrucciones De Uso

CombiLyz AFI4/AFI5
Transmisor inductivo de conductividad
14.2 Estructura de menús de DFON
AFIx menu
Menu
Display menu
Data display mode
32 / 36
Medición de la conductividad
Identi cation Product data
Product identification
Communication data
Poll address
Loop current mode
Input con g.
Conductivity ranges
Temp. compensation
Output con g. Output mode
Conductivity mode
Concentration mode
Temperature output
Output current limits
Error output
Output damping
Diagnosis Factory reset
Calibrate conductivity
Calibrate temperature
Reset user calibration
Instrucciones de servicio
Type, S/N, Prod. date, FW
Tag, User date
Poll addr., Desc., Message
Write address number
Enable / Disable
Conductivity range 1
Conductivity range 2
Conductivity range 3
Conductivity range 4
Range 1 (%/K)
Range 2 (%/K)
Range 3 (%/K)
Range 4 (%/K)
Advanced compensation De ne advanced comp.
Cond. mode / Conc. mode
Range 1
Range 2
Range 3
Range 4
Use a PC
Temp. at 4 mA
Temp. at 20 mA
Output temp. unit
Lower current limit
Upper current limit
Lower temp. curr. limit
Upper temp. curr. limit
Error output current
Error output channel
Damping value
Yes / No
Calibration value
Calibration value
Yes / No
Select range
Select range
Select range
Select range
Compensation value
Compensation value
Compensation value
Compensation value
Cond. at 4 mA
Cond. at 20 mA
See Range 1
See Range 1
See Range 1
Temperature value
Temperature value
Celsius / Fahrenheit
Current value
Current value
Current value
Current value
Current value
Select channel
www.baumer.com