Dryer exhaust to right,
6
left or bottom cabinet
Warning -
Before performing this
exhaust installation, be sure to disconnect the
appliance from its electrical supply. Protect
your hands and arms from sharp edges when
working inside the cabinet. Be sure to wear
gloves.
For downward venting, rotate elbow sections so that elbow
points downward.
*
*
Remove removable lid as desired (only 1).
Installation instructions
C
H
Floor
21
Exhaust to left or right of cabinet
•
For duct to exhaust to one side, remove knockout (ONLY 1).
Rotate elbow sections so that the opening points to the
side. Preassemble 4" elbow with 4" duct.
Use only 4" rigid metal for ducting inside the dryer.
•
Insert duct assembly through side opening and connect to
internal elbow.
Caution:
Be sure not to pull or damage the electrical
wires inside the dryer when inserting the duct.
4" rigid metal
C
H
C
H
Apply duct tape as shown on the joint between the dryer
internal duct and the straight duct pipe.
Caution:
Internal duct joints must be
secured with tape; otherwise
they may separate and cause
a safety hazard.
Duct tape