Troubleshooting - Wirbel O 143 S10 Uso Y Mantenimiento

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
PROBLEM
Although the lever release
button and brush rotation
levers are pressed at the
same time, the machine
does not start.
The pad holder does not
rotate.
No water is released
Polishing liquid is not re-
leased.
Insufficient floor cleaning
The machine operates er-
ratically or vibrates heavily.
The machine turns off unex-
pectedly during operation.

TROUBLESHOOTING

CAUSE
The appliance is
unplugged.
The brush/pad holder rota-
tion lever is not pressed.
Presence of foreign bodies. Remove any foreign bod-
The tank is empty.
Water supply lever not
pressed.
The tank is empty.
Button not pressed.
Pad or chemical product
not suitable.
Pad worn.
Check that the pad is
perfectly centred in the pad
holder.
Pad not suited to floor type. Use a pad suited to the
Motor thermal protection
activation.
ENGLISH - 9
SOLUTION
Plug the appliance in.
Press the lever.
ies stuck in the appliance.
Fill the tank.
Press the lever.
Fill the tank.
Press the button.
Use a pad or chemical
product that is appropriate
to the type of floor to be
polished.
Replace the pad.
Replace the pad, centring it
correctly in the pad holder.
floor surface.
Restore the reset button
until it "Clicks" and make
sure to work in the correct
range.