Measurement Menu; Alarm And Functions Menu; Settings Menu - Lofrans THETIS 5003 Manual De Instalacion Y Uso

4.3 Measurement menu

Measure
R e s e t M e a s u r e
U n i t s
E x i t

4.4 Alarm and functions menu

4.5 Settings menu

8
Use the
Reset Measurement
Resets the chain measurement value (0.0).
Units
Selects the unit of measurement:
N o
F e e t
Exit
To return to the settings menu.
Use the
Up Alarm
It is possible to enable the function and establish the
height at which the anchor-winch stops; After must
release the up button to continue to other function.
Settable values: 1.0 - 1.5 - 2.0...5.0 (metres or feet).
Load Default
This function allows the User to revert to the original
factory default settings, thus erasing all settings
memorised.
This command must only be used in the event of
programming errors.
Exit
To return to the settings menu.
Use the
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Back Light
By enabling this function it is possible to start the
display luminous intensity programming procedure.
(default value 120 seconds).
30
Light Time
This function allows the user to set the backlight on
time during which the display remains lit after the last
command given (default value 30 seconds).
Keyboard Beep
This function allows the user to enable or disable the
buzzer (emitted each time a key is pressed).
Exit
To return to the settings menu.
(DOWN) or (UP) key to move around the parameters
Feet/ inches
Metres / centimetres
(DOWN) or (UP) key to move around the parameters
(DOWN) or (UP) key to move around the parameters
THETIS 5003
Select with
= Yes = No
Confirm with
Select with
= Feet = Metres
Confirm with
Confirm with
Select with
Select value with
Confirm with
Select with
= Yes = No
Confirm with
Confirm with
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
= Yes = No
Confirm with
Confirm with