Bushnell PINPRO Manual De Instrucciones página 9

PinFire Mode – The PinPro is ready to fire when the external display shows a solid "–". A quick press
and release activates PinFire Mode and the PinPro will beep once. In this mode the display horizontally
scrolls line segments as follows:
Y
Non-PinFire Mode – NON-PinFire Mode is indicated by a vertical scroll of all 3 '– – –' segments in the
numeric display.
Y
auDio tonEs:
One Beep:
– Upon initial firing indicates the laser is active and pulses are being emitted from the objective lens.
– The laser has finished firing and distance was not acquired.
Two Beeps:
– Indicates a target has been acquired in PinFire Mode.
– Heard during unit of measure set-up
Three Beeps:
– Indicates a target is acquired in Non-PinFire mode.
Y Y
Y Y
9