Heated Appliances (Ebrh/70-120 And Ebrh/100-150) - Hupfer EBR/70-120 Manual De Instrucciones

Chapter 4
Page 14
INFO
Step 2: Installation
EBR/70-120
Insert the appliance into the worktop cut-out from above and fasten it.
Figure 4
4.2.2

Heated appliances (EBRH/70-120 and EBRH/100-150)

DANGER
ATTENTION
Cup Dispenser
EBR/70-120 | EBR/100-150 | EBRH/70-120 | EBRH/100-150
Disposal of packing material
The packing consists of recyclable materials and can be disposed of appro-
priately. Thereby, the different materials are to be separated and disposed in
an environmentally compatible manner. In any case, the local bodies respon-
sible for disposal are to be involved for this purpose.
Assembly instructions
Hazardous electrical voltage
The electrical voltage may be considerably dangerous to limb and life of per-
sons and lead to injuries.
All work on the electrical installations should only be carried out by a certified
electrician or by authorised specialists under supervision and monitoring of a
certified electrician according to the applicable electro-technical regulations.
Risk of hot surfaces
The internal surfaces and base plates of the heated appliances can become
hot during and/or after the operation. The heated appliances should not come
into contact with light inflammable materials.
Ensure that there is enough space between the housing and cladding re-
quired for air circulation.
Transport, Assembly, Putting into Operation and Decommissioning
Assembly
91285809_A0