Problem Solving Guide; Troubleshooting; For Best Performance - Carpet Pro CPU-3QD Manual Del Usuario

PROBLEM SOLVING GUIDE

Troubleshooting

WARNING! To reduce the risk of electrical shock or injury from moving parts, unplug
vacuum before servicing or cleaning.
CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with
wet hands.
PROBLEM
Vacuum won't
turn on
Vacuum won't
pick up or low
suction
Dust escaping
from vacuum
Any other service should be performed by an Authorized Service Representative.
To locate your nearest Authorized Retailer, visit our website at

For Best Performance

• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bags when they are 2/3 full to maintain optimum
cleaning efficiency.
• Change filters when dirt is visible on them or every six months if someone in your
home suffers from allergies. Otherwise, once a year should do for replacing the filters.
• Replace filters frequently if vacuuming fine powders such as flour or drywall dust.
• Always use genuine filters and parts, as use of other products may result in poor
cleaning or filtration performance. Genuine filtration products are designed
for maximum performance.
• Store machine carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner's manual instructions.
14
CHECK POINT
Power Cord
House Fuse or Breaker
Vacuum Bag
Filter
Hose
Bag Compartment Cover
Filter
Vacuum Bag
CarpetProVacuums.com or call 866-539-2099.
POSSIBLE SOLUTION
Plug unit in firmly.
Replace fuse/reset breaker.
Install new bag.
Install new filter.
Remove obstacle.
Reinsert the cover and secure latch.
Review filter installation (page 8).
Review bag installation (page 8).