Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Instructions for Installing TD-300
Elevator Channel Drain
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information
can result in death, serious personal injury, property
damage, or damage to the equipment.
Keep this Manual for future reference.
Installation Guidelines
General Note: Please consult all local plumbing codes before installing
Watts channel drains.
Introduction
Watts TD-300 Elevator Channel Drain is designed with safety and aesthetics in
mind. Our channel drain is engineered to withstand heavy foot traffic, as well as
heavy loads without compromising style and design. The stainless steel surface area
provides durability and safe integration in outdoor to indoor transitions and in elevator
and building thresholds. The TD-300 is heel proof, wheelchair accessible and ADA
compliant. It complies with 2013 California Building Code 403.6.1, 403.6.2, 3007.4,
3008.4, and SFFC Section 511.1.4 for a flow rate of 100 GPM.
Benefits Of Elevator & Threshold Drains
Low profile offers a smooth integration between outdoor and indoor areas
Available in lengths from 36" min. to 96" max.
12 ga. 304 stainless steel is engineered for both durability and style
Removable grating allows for low maintenance and easy installation
TD-300 offers superior flow rates while maintaining a shallow depth
IS-WD-TD-300-USA
Publicidad
Tabla de contenido
Resumen de contenidos para Watts TD-300
- Página 1 Watts channel drains. Introduction Watts TD-300 Elevator Channel Drain is designed with safety and aesthetics in mind. Our channel drain is engineered to withstand heavy foot traffic, as well as heavy loads without compromising style and design. The stainless steel surface area provides durability and safe integration in outdoor to indoor transitions and in elevator and building thresholds.
-
Página 2: Side View
Note: The TD-300 offers a 6"(152) no hub outlet. The product ships standard with center outlet. End outlets are available by special request. Please make sure that you have specified the correct area before installation begins. Note: Minimum dimensional requirements must be met to satisfy 100 gpm flow rate specification. - Página 3 Anchor Strap Top View Watts TD-300 installs during new construction or in existing floors Elevator/Threshold channels should sit slightly below flooring to ensure a smooth transition from one area to another when the grate is installed. The grate should match up flush with the floors and create a safe level transition.
- Página 4 Limited Warranty: Watts Regulator Co. (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
-
Página 5: Instrucciones Para Instalación Del Td-300
Watts. Introducción El Drenaje de canal de elevador Watts TD-300 está diseñado teniendo en mente la seguridad y la estética. Nuestro drenaje de canal está diseñado para resistir el tráfico pesado a pie, al igual que cargas pesadas sin renunciar al estilo y al diseño. El área superficial de acero inoxidable proporciona durabilidad e integración segura en transiciones de interiores a... -
Página 6: Vista Del Extremo
Nota: El TD-300 ofrece una salida de 6" (152 mm) sin centro. El producto se maneja de forma estándar con una salida central. Las salidas del extremo están disponibles bajo pedido especial. Asegúrese de que ha especificado el área correcta antes de iniciar la instalación. -
Página 7: Instalación Del Canal
Correa de anclaje Vista superior El Watts TD-300 se instala durante una construcción nueva o sobre pisos existentes Los canales de elevador/umbral deben de estar asentados justo debajo del piso para asegurar una transición uniforme de un área a otra cuando se instale la rejilla. La rejilla debe coincidir a nivel con los pisos para crear un nivel de transición seguro. -
Página 8: Instalación De La Rejilla
Garantía limitada: Watts Regulator Co. (la “Compañía”) garantiza que los productos no presentarán defectos en el material y la mano de obra cuando se usen en forma normal, durante un periodo de un año a partir de la fecha de envío original.