Overhead Rigging - Briteq WR-DMXG4 Manual De Instrucciones

ENGLISH
6. MAINS INPUT: with IEC socket; connect the supplied mains cable here.
7. DMX OUTPUT: 3pin XLR connector (pin1 = ground/shield ; pin2 = data- ; pin3 = data+)
8. DMX INPUT: 3-pin XLR connector (pin1 = ground/shield ; pin2 = data- ; pin3 = data+)
CONNECTIONS WR-DMXG4 RECEIVER
9. MAINS INPUT: with IEC socket; connect the supplied mains cable here.
10. DMX OUTPUTS: the WR-DMXG4 has 2 identical DMX-outputs: you can use the 3pin XLR connector
(pin1 = ground/shield ; pin2 = data- ; pin3 = data+) or the 5-pin XLR connector (pin1 = ground/shield ;
pin2 = data- ; pin3 = data+ ; pins 4/5 = not used). Don't use both together !

OVERHEAD RIGGING

You can use the M10 thread on the top of the box to fix a rigging hook.
 Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
 Locate the fixture in a well-ventilated spot, far away from any flammable materials and/or liquids.
 The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
 Before rigging make sure that the installation area can hold a minimum point load of 10times the device's
weight.
 Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
 The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
 The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
BRITEQ
®
4/30
OPERATION MANUAL
WIRELESS DMX SYSTEM