Presentation - Aqua-Base YC1 Guía De Montaje Y De Mantenimiento

WARNING : Read this documentation carefully in its entirety, before installation, use or maintenance of the AQUA-BASE
desalination unit. In this way you will avoid incorrect operating faults which may lead to consequences that will not be cove red by the
guarantee.
SUMMARY
Page Chapter
9 1

Presentation

9 2 Characteristics
10 3 Description
10 4 Installation
11 5 Extra
12 6 Starting up
12 7 Utilisation
13 8 Service
23 9 Spare parts
21 Starting up report
26 General layout
35 Electric drawings
AQUA-BASE service
36
1. PRESENTATION
Water makers AQUA-BASE range Y is available in kit form YK, or compact form YC.
AQUA-BASE kit version YK is supplied in separated sets :
- seawater booster pump with strainer,
- 20µ and 5µ filter,
- HP pump set with coupled electric motor,
- R/O module with pressure control system,
- pipes, fittings and fixation components necessary for installation,
- technical handbook.
In both version, hull fitting and hull valve are not included in our scope of supply.
2. CHARACTERISTICS (See Fig.1p24 & Fig.1bisp25)
TYPE
Dry mass
Std. capacity (2)
Maximum capacity (3)
Pressure (1)
Pipes
Feeding A / B / C/ D
Reject L
Production I / J / K
Voltage
Elec. consumption
HP pump speed
HP pump flow
(1) The pressure is adjustable, to optimize performances, according to operating conditions.
(2) The nominal capacity is given for a new unit, nominal membranes performances, operating in standard sea water TDS 35000ppm (35g/l) and temperature
25°C. The capacity can vary from +/-15%, according to allowances given by the membranes manufacturers.
(3) This flow is the maximum authorized. Pressure should be adjusted in order not to exceed this : it should particularly be reduced as soon as the sea water
salinity noticeably decreases, notably at river mouths.
Water system & electrical circuit
Positioning, water system connection and electrical connection
Remote panel
ON, OFF, rinsing, preservation
Schedule, consumables, maintenance operations, membranes cleaning
YC1 / YK1
kg 61 / 52
l/h 60
l/h 70
bar
mm
mm
mm
V
A 25
Rpm 1200
l/h 700
AQUA-BASE compact models YC, are supplied in a compact frame.
Only the Booster Pump is supplied in a separated set, in order to
allow its installation below the water line.
YC2 / YK2
69 / 60
120
135
40 to 70
15 x 23
8 x 13
8 x 13
115/1/60 230/1/50 230/3/60
13
1000
600
AQUABASEYFR-GB-ES 01-2007
YC3 / YK3 YC4 / YK4
77 / 68 85 / 76
180 240
200 250
400/3/50
8 4.5
1200 1000
700 600
F R / G B / E S Page 9/9
VERSION 01/07