Solter OPTIMATIC Serie Manual De Instrucciones página 7

INTRODUCTION
We appreciate your deference to our brand and we hope the welding screen you have just purchased will be of
great use to you. This instruction manual contains the necessary warnings for correct use within the maximum
safety conditions for the operator. SOLTER welding filters must be used by expert personnel who know and
understand the risks involved in using them. In case of misunderstanding or doubts about this manual, please
contact us. Handling the weld filter carries a significant risk of injury. Please refrain from doing any
manipulation on the filter or helmet. Only technically trained personnel can do it.
SOLTER Welding, SL declines all responsibility for negligent practices in use and / or handling. This manual
should be attached and kept with the filter model purchased. These filters are designed and approved in
accordance with European Standard EN 379.
It is the responsibility of the people who use and repair them that the product does not fail to meet the
requirements of the aforementioned standards.
BEFORE STARTING TO WELD
Before using any of the welding filters be sure to remove the corresponding protection films, keep the viewing
area and the front part of the filter clean since there are the sensors that take care of the filter darkening.
Inspect all operating parts before using the display and check for signs of deterioration. Any damaged part
must be replaced immediately before use. Check the operation of the filter before each use.
Also make sure that the attachment to the protection screen is correct to prevent it from detaching in the event
of any impact, which could cause personal injury to the user.
In case the filter darkening DIN is adjustable, adjust correctly before any application. To find out the
appropriate degree for all applications, consult the section FILTER CHOICE CHART ACCORDING TO
APPLICATION of the protection screen manual.
TECHNICAL SPECIFICATIONS
MODEL
Polycarbonates
Viewing Area
CE
Dimming
Power Type
On / Off
Sensitivity
Speed Dark / Light
Working
temperature range
Weight
OPTIMATIC 150
FLIP UP
110x90x8mm
89 × 39mm
1/1/1/2
Adjustable(DIN 4 /
9-13) INTERIOR
Solar panels and 1
replaceable battery
CR 2032
Automatic
Adjustable (Indoor)
0 , 1s MIN
1.0s MAX
- 10ºC to + 60ºC
0.8 Kg
OPTIMATIC 100
110x90x8mm
96x39mm
1/1/1/2
Adjustable (DIN 4 /
9-13)
Solar panels and 1
replaceable battery
CR 2032
Automatic
Adjustable (Indoor)
0.1s MIN
1.0s MAX
- 10ºC to + 60ºC
0.8 Kg
OPTIMATIC 55
110x90x8mm
96x39mm
1/1/1/2
Adjustable (DIN 4 /
9-13)
SolarSolar
Automatic
Adjustable (Indoor)
0.1s MIN
1.0s MAX
- 10ºC to + 60ºC
0.75 Kg
OPTIMATIC 50
110x90x8mm
91x39mm
1/1/1/2
Fixed (DIN 11)
SolarSolar
Automatic
Adjustable (Indoor)
Low (LOW)
High (HIGH)
0.1s SLOW
0.8s FAST
- 10ºC to + 60ºC
0.75 Kg
7