Technical Specifications - Fagor BB-175 Manual De Instrucciones

1. INTRODUCTION
Dear customer,
We recommend you read this instruction
manual carefully before using the scales for
the first time, in order to use them correctly.
You should also keep this manual for further
reference.
2. APPLIANCE DEFINITION (FIG. 1)
1. Display
2. Weighing surface
3. Kg/Lb selector
4. Solar power panel
Interference suppression: The interference
of this appliance has been suppressed in
accordance with interference suppression
standards.
Electromagnetic compatibility: This
appliance complies with the EMC
standards of electromagnetic compatibility.

3. TECHNICAL SPECIFICATIONS

• Max. capacity:150 Kg / 330 lb
• Min. capacity: 3Kg / 6.6 lb
• Graduation: 100 g / 0.2 lb
• Solar power supply
• Foot-touch start.
• Automatic start-up
• Automatic switch-off.
• Overload indicator.
4. ADJUSTMENT
1. The scale has a solar power supply. It
can keep working in the light (sunlight
or lamplight). LCD shows a flashing "0"
when standby. Make sure to put the
scale in the light (sunlight or lamplight),
and solar power panels are not covered.
2. If the light is too weak, scale will shut off
due to low power. If LCD does not show
a flashing "0", please turn on the lamp
EN
or move the scale to other place with
light not less than 70lx. The scale will
switch on again after 60-90 seconds.
5. FUNCTIONING
Step 1. Select the unit of measurement
using the Kg / Lb selector (3).
Step 2. Place the scales on a hard,
horizontal surface. Avoid carpets
to ensure greater precision and
repeatability in the reading. Try
and always weigh yourself with the
scales in the same place.
Step 3. The scale will come on
automatically when you stand on it
or press the platform. (>15kg)
Make sure to put the scale in
the light (sunlight or lamplight),
and solar power panels are not
covered.
Step 4. If LCD shows a flashing "0"
step onto the scale gently. LCD
shows "---" meaning weighing
is proceeding. Wait for about 3
seconds until the scale displays
weight reading.
Once your weight has been displayed, wait
for the scales to switch off. If you try and
weigh yourself again with the scales still
in operation showing the previous weight,
they will not work. Once the scale display
"0.0", get on it again and weigh yourself.
Step 5. When you get off the scales, they
will switch off automatically.
5