Listening To The Radio; Alarm Function - AEG MRC 4137 Instrucciones De Servicio

English
50

Listening to the radio

Scanning stations
1. Press the MODE button to switch on the radio.
2. Control the volume with the VOL+/AL1 or the VOL-/AL2 button.
3. If you press the SCAN+ or the SCAN- button briefly, the device will scan to the next
radio station.
NOTE:
If there is interference on the received station, try to improve the reception by changing
the position and by unwinding or winding the antenna.
Presetting radio stations
1. Search for a station as described in "Scanning stations".
2. Press the MEMO/CH+ button. The pre-set location will be displayed. Select the pre-
set location with the SCAN+ or the SCAN- button.
3. Press the MEMO/CH+ button to store the station.
Recalling preset radio stations
While in radio operation, repeatedly press the MEMO/CH+ button. One pre-set location
after the other will be called up.

Alarm function

General information
• You may now set the alarm times in time mode.
• You'd like to be woken up by radio? Set the correct volume and the station ahead of
time.
• When the alarm time has been reached, the symbol will blink for the first, or respec-
tively the second alarm time.
Setting the Alarm Time
1. Press the VOL+/AL1 button. The currently set alarm time is displayed.
2. Press the VOL+/AL1 button again. The hours will flash.
NOTE:
• You may now use the MODE button to choose between buzzer and radio. The
symbol " " appears in the display if you selected radio.