Cleaning And Maintenance - Bestron DLD404 Manual Del Usuario

Finishing
16. Using the trimmer without a comb attachment will enable you to obtain a clean
Thin out
1.
2.
3.
4.
Tips
•
•
•
•

Cleaning and maintenance

Clean the trimmer thoroughly after each use.
1.
Figure 4
2.
3.
4.
5.
6.
7.
PLEASE NOTE
•
•
26 EN v 091019-05
edge at the base of the neck.
Fit the thin out attachement to the trimmer
Switch on the trimmer by setting the On/Off switch to 1 (On).
Start cutting your hair. Move the trimmer at an angle to your skin to remove
unwanted hairs.
After use, switch off the appliance by setting the On/Off switch to 0 (Off).
Washing and drying your hair and then combing it thoroughly will make it more
supple when you trim it.
Comb your hair before and regularly during trimming to make sure it remains in
the required model.
Do not move the trimmer too quickly; allow the cutting comb to pass through the
hair without using force. Comb your hair regularly during trimming to check that it
has been trimmed evenly.
Use the cape to protect your clothing.
Remove the comb attachment, where relevant, from the trimmer so that you can
clean the appliance thoroughly.
Remove trimming head
Press the trimming head's cutter downwards firmly with your thumbs (see figure
4). The trimmer head will now be released from the appliance.
Use the brush to remove hairs from the trimmer head and from the cavity in the
appliance.
Fit the trimmer head back onto the appliance.
Clean the appliance with a clean damp cloth.
Lubricate the cutting comb with a few drops of oil supplied with the appliance.
Fit the plastic protective cap over the cutting comb, and store the trimmer in its case.
Make sure the appliance is not connected to the mains via the adapter before you
clean it.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives
or hard brushes) to clean the appliance.
User's instructions, Kids trimmer set
DLD404