Cleaning And Maintenance - SOLAC VT8800 Instrucciones De Uso

USER INSTRUCTIONS
• Press the start button / speed selector (6) to start the fan; it will start on its
lowest speed. The relevant pilot light will come on.
• If you press the button again or another two times, the appliance will work
at medium or high speed, and in each case the relevant pilot light will come
on.
• The fan will stop when the stop button (3) is pressed.
Oscillation selector:
must press the oscillation selector (5). If you press it again, the fan will stop
oscillating and remain in a fixed position.
Do not force it to oscillate manually.
Stop timer:
It is possible, while the fan is working, to set it to stop auto-
matically after a preset time has passed. The fan can be programmed to stop
after 30 minutes and up to 7 hours and 30 minutes, at thirty-minute inter-
vals.
• Press the stop timer (4) once to set the timer for 30 minutes starting at that
time. After this time has passed, the appliance will stop working. Likewise,
every time you press the timer (4) will delay the automatic stop of the ap-
pliance by 30 minutes. The selected time will be shown by the pilot lights
in the screen.
• To deactivate the timer function, press the stop timer (4) once more after
selecting 7 hours and 30 minutes.

CLEANING AND MAINTENANCE

• Your appliance must be disconnected from the mains before any cleaning
operation is performed.
• Clean with a slightly damp cloth.
• Never immerse the appliance in water or any other liquid. Check that no
drops of liquid enter the motor area.
• Do not use solvents or abrasive cleaners to clean the device, since they could
damage its plastic parts.
• When the appliance is not in use it should be kept in a damp-proof loca-
tion.
8
Ventilador VT8800 8
If you want the appliance to oscillate horizontally, you
5/1/06, 09:23:48