Hardware Overview; Front View; Power Button - D-Link DNS-722-4 Guia De Instalacion

Hardware Overview

Front View

Power Button

Drive LED Drive LED
Network Activity LED
Power Button:
Press once to power on the NVR. Press and hold the button until the LED
begins to blink to power down the NVR.
Drive LEDs:
These LEDs will be solid BLUE when the drives are connected but inactive.
The LEDs will blink when the drives are being accessed, formatted or
synchronized. They will illuminate AMBER if a drive has failed.
Activity LED:
The LED will be solid BLUE when there is an Ethernet connection. It will
blink to indicate LAN traffic.
D-Link DNS-722-4/726-4 Quick Install Guide
3