Monitoring With Cycle Switch - Vogel IG502-E Instrucciones Para El Manejo

8.7

Monitoring with cycle switch

May be used only in centralized
lubrication systems featuring
progressive feeders. For greases up to
NLGI class 2.
The cycle switch is used for monitoring the
movement of the pistons in the progressive feeder
during the CONTACT time. In the programming
mode, the following monitoring function must be
activated COP = CS. See section 7.3.
1
15
31
15
PS/CS
M 31
F
2
On-board system
Installation and electrical connection
of cycle switch (Fig. 8)
Page 27
Operating Instruction Universal Control Unit IG502-E
5
2
2
1 Control unit IG502-E
2 KFG... pump with lubricant reservoir
3 Progressive feeder
4 Progressive feeder
5 Cycle switch
6 Friction points
Contents Chapter
Central
8
Lubrication
3
6
4